STEP 5
1.
Attach back board (8) to pre-assembled cabinet by inserting 14 wood screws (K) through the
holes on the back board (8) then tighten to the back of cabinet by using a Phillips screwdriver.
STEP 6
1.
Attach the magnet plate (H) to door (7) by inserting 2 screws (F) through the holes on magnet
plate
(H) then tighten to door (7).
2.
Attach the knob (J) to door (7) by inserting 1 machine screw (I) through the hole on the door (7)
then tighten to the knob (J).
