STEP 12
1.
Insert 4 wood dowels (C) into wood dowel holes on top board (6).
2.
Place cross bar (7) onto grooves on lower left side panel (13) and lower right side panel (14).
3.
Attach pre-assembled upper section to pre-assembled lower section by inserting wood dowels (C)
into wood dowel holes and inserting cam bolts (A) into cam lock holes on lower left side panel (13)
and lower right side panel (14).
4.
Insert 4 cam locks (B) into cam lock holes on lower left side panel (13) and lower right side panel (14),
then rotate clockwise to secure cam bolts (A) in place.
