STEP 1
1. Screw 4 cam bolts (A) into cam bolt holes on top board (1).
2. Attach adjustable anchor brackets (L) to top board (1) by inserting 2 screws (M) through
holes on brackets (L), then tighten to top board (1).
3. Screw 4 cam bolts (A) into cam bolt holes on middle connection board (3).
STEP 2
1. Screw 4 cam bolts (A) into cam bolt holes on upper left side frame (9).
2. Repeat above step for upper right side frame (15).
STEP 3
1. Screw 4 cam bolts (A) into cam bolt holes on lower left side panel (10).
2. Screw 4 cam bolts (A) into cam bolt holes on lower right side panel (11).
