RiverRidge 06-107, Assembly Instructions Manual, Page: 8 / 11

STEP 8
STEP 8
1. Insert 1 wood dowel (C) into wood dowel hole on lower left side panel (9).
2. Attach bottom board (8) to lower left side panel (9) by inserting wood dowel (C) into wood dowel hole
and inserting cam bolts (A) into cam lock holes on bottom board (8).
3. Insert 2 cam locks (B) into cam lock holes on bottom board (8) and rotate clockwise to secure cam bolts
in place.
4. Repeat above steps to assemble lower right side panel (10) to bottom board (8).
5. Slide lower back board (12) to grooves on lower left side panel (9), lower right side panel (10) and
bottom board (8).
STEP 9
STEP 9
1. Attach door (6) to bottom board (8) by inserting door pin (K) into door pin hole on bottom board (8).
2. Attach pre-assembled upper unit to pre-assembled lower unit by inserting door pin (K) into door pin hole
on middle connection board (5) and inserting cam bolts (A) into cam lock holes on lower left side panel
(9) and lower right side panel (10).
3. Insert 4 cam locks (B) into cam lock holes on lower left side panel (9) and lower right side panel (10),
then rotate clockwise to secure cam bolts in place.