RiverGrille TF2201802-RG Assembly & Operating Instructions Download Page 1

Page: 1 / 30

Page 1 of 30 20160927-Ver.1

Oil-less Fryer & Roaster

Model number: TF2201802-RG

ASSEMBLY & OPERATING INSTRUCTIONS

Tools required (not included):
Phillips screwdriver / Adjustable wrench

For Outdoor Use Only



To installer or person assembling this appliance: Leave this manual with this

appliance for future reference.



This instruction manual contains important information necessary for the

proper assembly and safe use of the appliance.



Read and follow all warnings and instructions before assembling and using

the appliance.



Follow all warnings and instructions when using the appliance.



Keep this manual for further reference.

Please keep this instruction manual for future reference

Customer Service: (888) 837-1380, 8:00am to 5:00pm, Monday to Friday,

Pacific Standard Time

(Made in China)

(Tank Not Included)

Summary of Contents for TF2201802-RG































Search results

Summary of Contents for TF2201802-RG

Reviews:

Related manuals for TF2201802-RG

Brands by name

Popular brands

RiverGrille TF2201802-RG, Assembly & Operating Instructions

Search results

Summary of Contents for TF2201802-RG

Reviews:

Related manuals for TF2201802-RG

Brands by name

Popular brands