30 | Rack Mounting 9600 Appliances
Rail kits
3. Position the appliance so that the keyed openings on the rails are aligned with the locating pins on
the sides of the appliance. (See
.)
Figure 4-11. Aligning the appliance
4. Start with the back of the appliance and drop the rear spool into the rail and continue until the
appliance is fully positioned in the rail.
5. Lift the release tab and push the appliance into the rack. (See
.)
Figure 4-12. Pushing the appliance into the rack
To remove the appliance
1. Fully extend the rails.
2. Lift the appliance out of the rails and remove the appliance from rack.
