Riverbed SteelHead 3070-SD, User Manual

Page: 23 / 124

Configuring DHCP Options in Zones on SteelHead SD | 23
3
Configuring DHCP Options in Zones on
SteelHead SD
This topic describes how to configure DHCP options in zones on SteelHead SD appliances. It includes
these sections:
• “Configuring DHCP options on SteelHead SD LAN clients” on page 23
• “Overriding DNS on guest zones on SteelHead SD” on page 24
These procedures describe how to configure DHCP options in zones on SteelHead SD 570-SD, 770-SD,
and 3070-SD appliances and the SteelConnect SDI-2030 gateway located at the branch. For additional
information, see the
SteelConnect Manager User Guide .
Configuring DHCP options on SteelHead SD LAN clients
SteelHead SD appliances support the ability to configure these DHCP options in zones:
• Preboot Execution Environment (PXE) boot using the Trivial File Transfer Protocol (TFTP)
• Session Initiation Protocol (SIP) server
• HTTP proxy
To create a zone and DHCP options on SteelHead SD LAN clients
1. Choose Network Design > Zones page and select the appliance.
2. Click New Zone .
3. Select the site from the drop-down list.
4. Type a name to describe the zone.
5. Optionally, specify the IPv4 network using the a.b.c.d/nn format. This IP address can be autoassigned.
6. When multiple SteelHead SD appliances are available, select the default gateway for this appliance.
from the list.
7. Optionally, specify the VLAN tag. Every zone has a VLAN tagged assigned to it. If you leave this option
blank the system will automatically assign a VLAN tag to the zone.
8. Click Submit .
9. Select the zone from the zones list.