manualshive.com logo in svg

Riverbed Steelhead 1050 Series, Installation And Configuration Manual

Share
Download
Riverbed Steelhead 1050 Series Installation And Configuration Manual Download Page 10

10

Steelhead Appliance Installation and Configuration Guide

            

Introduction

Additional Resources

„

F-Secure Anti-Virus v5.43 on the client

„

F-Secure Anti-Virus v5.5 on the server

„

Network Associates (McAfee) NetShield v4.5 on the server 

„

Network Associates VirusScan v4.5 for multi-platforms on the client

„

Symantec (Norton) AntiVirus Corporate Edition v8.1 on the client

Additional Resources

This section describes resources that supplement the information in this guide. It contains the following 
sections:

„

“Online Notes,” 

next

„

“Riverbed Documentation and the Support Knowledge Base” on page 10

„

“Related Reading” on page 10

Online Notes

The following online file supplements the information in this manual. It is available on the Riverbed 
Technical Support site at https://support.riverbed.com.

Please examine this file before you begin the installation and configuration process. It contains important 
information about this release of the Steelhead appliance.

Riverbed Documentation and the Support Knowledge Base

For a complete list and the most current version of Riverbed documentation log in to the Riverbed Technical 
Support Web site located at https://support.riverbed.com. 

The Riverbed Knowledge Base is a database of known issues, how-to documents, system requirements, and 
common error messages. You can browse titles or search for key words and strings. To access the Riverbed 
Knowledge Base, log in to the Riverbed Technical Support site located at 
https://support.riverbed.com

. 

Related Reading

To learn more about network administration, consult the following books:

„

Microsoft Windows 2000 Server Administrator’s Companion by Charlie Russell and Sharon Crawford 
(Microsoft Press, 2000)

Online File

Purpose

<product>_<version_number>.pdf

Describes the product release and identifies fixed problems, known 
problems, and workarounds. This file also provides documentation 
information not covered in the manuals or that has been modified since 
publication. 

Summary of Contents for Steelhead 1050 Series









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands