SteelConnect SDI-2030 and SDI-5030 Gateway Specifications | 47
SDI-5030 gateway technical specifications
SDI-5030 gateway technical specifications
Power requirements and consumption
This table summarizes the power specifications for the gateway. The gateway is rated at the following
power characteristics when operating at nominal AC input voltages (110 V and 220 V).
Specification
Definition
Form factor
1U
CPU
2x E5-2620v4
Total no. of cores
16
Physical Interfaces
2 x 10 GbE ports (RJ45 ports 5 and 6)
4 x 1 GbE ports via base configuration NIC (ports1, 2, 3, and 4)
Riser-card slot 1
PCIe expansion slot (ports 7, 8. 9. and 10)
Riser-card slot 2
Not configurable (preinstalled offload compression NIC)
Hard drive disk
1 x 3.5 in 1 TB SATA HDD
Memory
8 x 16GB DDR4 = 128 GB
Dimensions
With bracket and power supply handle
1.72 in. (43.6 mm) x 17.25 in. (439 mm) x 30.25 in. (769 mm)
Without bracket and power supply handle
1.72 in. (43.6 mm) x 17.25 in. (439 mm) x 28 in. (712 mm)
Weight
33 lb (14.96 kg)
Voltage frequency
47 to 63 Hz
Power supply unit x 2
750 W
IOM NIC
Four-Port 1-GbE Copper Base-T
Specification
Definition
Configuration
1 + 1 redundant power
PSU type
2 x 750 W
AC input
90 to 130 on 110 V systems, 180-260 on 220 V systems
Typical Watts
285 W
Power factor
50% load >90%
BTU (typical)
972