1. Plug cord into 120 volt, AC outlet.
2. Raise piercing lever enough to wedge can between cutting blade
and feed wheel as shown.
3. Press lever down all the way to pierce lid and start
cutting action. “Power Pierce” feature: When you
press lever, motor will start rotating can for easier
piercing.
4. Let go of lever and can opener will continue cutting
and will stop automatically when can has been
opened. (It is normal for motor to occasionally con-
tinue cutting action for a few seconds after lid has
been completely severed.)
5. To remove can, grasp it firmly and raise lever. Slide lid
from magnet.
• To open cans over 2 lbs., hold top of can opener to stabilize it.
• Unit will not open rimless cans.
• If there is a dent in the rim of the can, open other end.
• Never open or eat the contents of a bulging can.
HOW TO OPEN CANS
PLEASE NOTE
piercing
lever
rim of
can
cutting
blade
feed
wheel
This appliance is for HOUSEHOLD USE ONLY. No user-serviceable parts inside.
Power Unit never needs lubrication. Do not attempt to service this product.
Do not immerse base in water or other liquid.
