Rival 2D.5803.1.K Installation Manual Download Page 2

2D.5803.1.K

to suit 

2D.0004.1 roof rack

VW Amarok 

2010-2016; 

20

1

6-ON

Aluminum (tube 30х3 mm, 25х3 mm)
1433х1

170

х163мм

1

5.6 kg

 

Part Number

:

Suited to vehicle

:

Material

:

Dimensions

:

Weight

:

TORQUE SETTINGS

INSTALLATION NOTICE

*

The RIVAL roof rack must be mounted and affixed to the vehicle according to the installation

manual provided by an authorized RIVAL dealer or Motor dealer or by a special vehicle repair or
fitment center.

*

Personal safety during the installation process must be adhered to at all times

and the use of personal safety equipment is highly recommended

.

REQUIRED TOOLS

*

Basic tool kit

*

Drill set

*М6    9 

Nm

*М8    30 

Nm

 

SAFETY NOTICE

*

The RIVAL roof rack is designed to compliment the use and design of the specified vehicle

under conditions specified by the car manufacturer

.

* While driving the vehicle at any speed, collision with any other vehicle, animal or object must

always be avoided.

*

The operation of a vehicle where the roof rack is not properly attached and fastened to the

vehicle, or where it has been damaged, must be avoided at all cost.

*

It is recommended that you carry out regular inspections of all the bracket fittings

.

ADITTIONAL INFORMATION

LIGHTS

There are mounting points located on roof rack for mounting 4 lights

.

The distance between lights 

200

 mm

.

Mounting hole diameter

 9

 mm

Total mounting area length 

600

 mm

.

ROOF RACK

Installation manual

 2

D

.5

80

3.1.

K

<

 

Page  1  of  5

 

>

Summary of Contents for 2D.5803.1.K







Reviews: