Инструкция по установке
www.rival4x4.com
13.
Attach the winch plate bracket
(pos.2) with brackets (pos.X1,X2) from
the inside, using bolts M10x20 (pos.E),
washers 10 (pos.L).
Do not tighten yet.
1 .
5 Install adapter (pos.3,4). Attach it to
the frame using bolt M10x20 (pos
.
E),
washer 10 (pos
.
L) and insert nut
(pos.P).
Attach adapter to the winch plate
bracket using screw M10x30 (pos.C),
two washers 10 (pos.L) and nut M10
(pos. I).
Tighten hardware after that.
1 .
6 Install vacuum pump on the
bracket, preventing contact with
radiator. Attach it using bolt M6x35
(pos.B), washers 6 (pos.K) and nuts
M6 (pos.H).
< Page
8
of 12 >
Installation manual
2
D.
270
1.1-NL
, 2
D.2702.1-NL
INSTALLATION PROCEDURE
14
.
Install insert nut (pos. Q) in adapter
(pos. 3,4). Unbend the wire.
17. Install horn using OE bracket and
bolts M10x20 (pos.E), washers 10
(pos.L) and nuts M10 (pos.I).
18. Install skid plate brackets
(pos.9,10) using bolts M10x20 (pos.E),
washers 10 (pos.L) and inner bracket
(pos.P) on both sides.
Date: May 25, 2020
