HD Series
RC6702HD-6211 Installation Guide
09-2013-B
www.rivatech.de
22
6.3. Reboot
Perform the following procedures to reset your device:
1.
Press the reset button for 2 seconds while the device is in use.
2.
Wait for the system to reboot.
Please do not hold the reset button for more than 2 seconds.
Otherwise, the camera may be switched to its Factory Default
settings.
6.4. Factory Default
Resetting the device back to the factory default will initialize all parameters
including the IP address back to the factory defaults. To reset back to the factory
default:
1.
Press the reset button and hold it while the device is in use.
2.
Release the button after 10 seconds.
3.
Wait for the system to reboot.
The factory default settings can be inferred as follows:
IP address:
192.168.xx.yy
Network mask:
255.255.0.0
Gateway:
192.168.0.1
User ID:
root
Password:
pass
6.5. Safe Mode
What is Safe Mode?
Your IP camera or encoder could encounter an unexpected occasion such as
broken firmware
file or uncompleted loading of firmware file during system booting. To restore the
device from the occasions, the device provides the emergency firmware as a
factory default. Your device will get restarted with safe mode when there is any
error on your booting system files.
Caution
!
Note
i