9
www.rivatech.de
4.INSTALLATION
1)
Place the installation template (paper)
that is included in the package on the
desired installation surface.
2) Drill three holes in correct positions
based on the template paper, and insert
anchor blocks into the holes.
3)
Insert the camera body to the
installation surface and match three
alignment holes with three anchor blocks.
4)
Tighten the surface anchor studs.
5)
Connect all the required cables to the
camera.
6) Adjust the lens position. Detailed
information can be found in 4.2. Setting the
Lens Position.
7)
Place the dome cover on the main body
of the camera. Dome cover has three
alignment holes that match camera body’s
alignment holes.
8) Once properly placed, insert hex screws
into the three holes of the body and tighten
them up with hex wrench driver.
To prevent products from damaging, place the camera on stable
and non-vibrating surfaces. If the stability is in doubt, consult with
safety personnel for reinforcements, and then proceed
with the installation.
Caution
!
