RC210309-2014-A
1
Quick Start Guide
This manual provides the instructions on the quick installation and the basic configuration commonly for an IP
camera with a regular fisheye lens and with a panomorph lens.
1. Connect cables to IP device
Connect required cables to the device including the power cable, LAN cable, and other optional cables.
To see the correct positions of all connectors, refer to the following image below.
The device is polarity sensitive. Incorrect power connection
may cause malfunction or damage to the IP device.
Caution
!
Power Adaptor Connector
(DC 12V)
LAN Connector
Reset Button
microSD/SDHC Slot
Power Adaptor Connector
(Located under the plate)
PAL/NTSC Button
Terminal Connector
* The model design is subject to change without any prior notice.
