11
www.rivatech.de
1)
Trace the size on a surface
where the device will be inserted
with the provided template and
create a hole. Also, mark on a
surface where anchor blocks will
be inserted.
2) Drill and insert anchor blocks on a
marked surface.
3)
Connect all the appropriate
cables to the main device and
place on the center of the hole.
Cables should be wired from other
side of the exposed surface.
4) Unscrew 3 bolts that are on the
dome cover’s surface and place the
FMB mount in between the top dome
shelf and bottom circular cylinder.
Align to the screws holes and re-tight
3 components with bolts.
5) Attach the dome cover on main
body from the surface side where it
will be exposed and lock it up by
rotating the cover.
6) Tighten the mounted surface’s
anchor blocks with screws on a FMB
mount parts..
When placing the dome cover, look for carved triangle mark on both
dome cover and main body. Both triangles should be aligned
together when placing the cover. Once the cover has been placed,
rotate the dome cover for a secure lock. To detach the cover,
rotate the dome cover and align two triangle marks, and pull the
cover.
Caution
!