13
RC/RE Series - Installation Guide
www.rivatech.de
6.2.2.View video using IP address
View the live video on a web page using your IP device and its IP address. To have the
correct IP address ready and use it on a web page:
1.
Convert a MAC address to an IP address or check the IP address on the
IPAdminTool. Refer to
Appendix (C): Hexadecimal-Decimal Conversion Table
.
(The MAC address is attached on the side or bottom of the device.)
2.
Open a web browser and enter the IP address of the device.
3.
Click pop-up blocked and install the ActiveX setup.exe by clicking the Run or Save
button. You need to install the ActiveX for displaying the images.
4.
Follow the instructions of the dialog boxes and complete the installation. Then the live
video is displayed on the main page of the web browser.
6.3. Reset
Hardware Reset is NOT supported. (Software Reset is available.)
To perform the Software Reset, please refer to the “HTTP API Manual” provided for
your encoder model.
6.4. Factory Default
Hardware Factory Reset is NOT supported. (Software Factory Reset is available.)
To perform the Software Factory Reset, please refer to the “HTTP API Manual”
provided for your encoder model.
MAC address = 00-13-23-01-14-B1 → IP address = 192.168.20.177
Convert the Hexadecimal number to Decimal number.
