10
4.2. Setting the Lens Position
Set the lens position and adjust the zoom and focus by performing procedures as
below.
1) Remove the dome cover.
2) Adjust the lens to the desired position by manually moving its body in the following
directions.
3) Connect to the web page of the device to see its real-time image. Refer to
step
6.
Configuration
for details about using its web page.
5) Unscrew the focus puller by turning it counterclockwise. Move it left or right and
adjust the image focus. After the setting, tighten the focus puller again by turning it
clockwise.
4.3. Setting the Image Attribute
You can set the image attribute of camera through the webpage.
The menu of image attribute can be seen under Setup > Video & Audio > Camera.
Brightness, contrast, saturation and sharpness can be adjusted.
Zoom puller
Focus puller
C. Tilt the lens
A. Rotate the lens
B. Pan the lens bottom
holder
4) Unscrew the zoom puller by
turning it counterclockwise.
Move it left or right and set the
lens to the desired zoom
position. After the setting,
tighten the zoom puller again by
turning it clockwise.