RS16141 Rev. 2/8/2016 BR
Remember, the water belongs to everyone.
Please ride responsibly and respect the environment!
Technical Support
For answers to questions regarding installation or trouble shooting RIVA Performance Products contact:
RIVA Technical Support directly at (954) 247
-
0705 or by e
-
mail at
.
Limited Warranty
RIVA Pro
-
Series Water Boxes carry a 6
-
month limited warranty to the original purchaser. They are warranted to be free of defects in materials and workmanship under
normal use and service. Customer modified components will be void of warranty. This warranty is limited to defects in the primary components only. Finish and/or wear
marks in or on primary components are not covered under this warranty.
RIVA Racing’s liability is expressly limited to the repair or replacement of the components contained within or associated with this kit. RIVA Racing agrees to repair or at
RIVA’s option, replace any defective unit without charge, if product is returned to RIVA Racing freight prepaid within the warranty period. Any equipment returned which, in
RIVA’s opinion, has been subjected to misuse, abuse, overheating or accident shall not be covered by this warranty.
RIVA Racing shall have no liability for special, incidental or consequential damages or injury to persons or property from any cause arising from the sale, installation or use
of this product.
No other warranty, express or implied, including, but not limited to the implied warranties of merchantability and fitness for a particular purpose, applies. Various states do
not allow for the limitation of incidental or consequential damages and therefore the above exclusion or limitation may not apply to you.
Warranty does not include the expenses related to freight or transportation of parts or compensation for any inconvenience or loss of use while being repaired. A copy of
the original invoice and a Return Authorization Number (RA#) must accompany all warranty claims.
Warranted replacement parts will be returned freight collect.
This area intenonally le blank
Figure 10
Install exhaust clamp and t
-
bolt.
NOTE: Check alignment
between exhaust pipe and exhaust manifold
.
Align water box with coupler. Secure coupler.
NOTE: Do
not tighten clamp
.
Secure water box outlet coupler to water box. .
NOTE: Do
not tighten clamps.
Install water box hold down strap.
TIP:
Spray underside
of water box strap with glass cleaner.
Once water box inlet and outlet couplers are in place and
water box is properly aligned tighten all of the inlet and
outlet clamps.
Note: Do not over tighten clamps.
Reconnect water box overheat sensor.
Replace cooling lines previously removed. (See Figure 4).
Replace engine breather hose at TOPS valve hose.
NOTE:
Do not over tighten clamps
.
Replace parts applicable to your craft that were removed to
access waterbox.
NOTE: Apply blue Loc
-
tite to bolts. Do
not over tighten bolts.
Check bilge for tools, rags, etc. Start craft and run using
flush kit to check for exhaust leaks at connecting points of
exhaust system. Do not run craft out of water for more than
two minutes at a time
