11
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
All fixtures should be given a DMX starting address when using a DMX
controller, so the correct fixture responds to the correct control signal. This
digital starting address is the channel number from which the fixture starts to
“listen” to the digital control information sent out from the DMX controller. The
allocation of this starting DMX address is achieved by setting the correct DMX
address on the OLED display located on the back of the fixture.
You can set the same starting address for all fixtures or a group of fixtures, or
set different address for each individual fixture. Be advised that setting all
fixtures to the same DMX address will subsequently control all fixtures in the
same fashion, in other words, changing the settings of one channel will affect
all the fixtures simultaneously.
If you set each fixture to a different DMX address, each unit will start to “listen”
to the channel number you have set, based on the quantity of control channels
(DMX channels) of each fixture. That means changing the settings of one
channel will only affect the selected fixture.
In the case of the par light, when in the 11 Channel Mode you should set the
starting DMX address of the first unit to 1, the second unit to 12 (1 + 11), the
third unit to 23 (12 + 11), and so on.
Battery
It need to charge a times for each two months, and
50% battery power at
least
, if for a long time without using. Please charging as soon as possible
when get lights, also more than 6 hours for first time.
DON’T CHARGE THE LIGHTS WHILE USING, IT WILL AFFECT THE
BATTERY LIFE.
