2. Preparation
To install the kit into the Palmer 212 unloaded open back ! cabinet you will need
some basic mechanical skills, several tools and some work space.
If you feel you do not have the tools, the skills or the work space, please do not
attempt to install this kit yourself.
You can order the Camper 212 cabinet completely built and finished for a
reasonable surcharge from us.
OK, lets do it !
•
Make sure you have some flat work space available on which you can put
the cabinet onto. A 1,5 x 0,6m workbench would be perfect.
•
Unpack the Palmer 2x12” unloaded cabinet and take the cabinet out of the
plastic bag.
•
Palmer will provide a set of screws for mounting the two 12” speakers.
Sometimes the small bag with these screws is a little hard to find inside the
large box. Please make sure you find this bag ; you will need these screws
later in the process.
•
Unpack our Camper 212 kit and check all of its components.
Our Camper 212 kit will include :
•
2 x 12” double cone broad band speaker
•
16 pieces 4,5mmx27mm flat head chipboard screws for panel mounting
•
back plate with venting holes
•
mounting plate
www.ritteramps.com
