Page 9
7. Configuration
7.1 Via Telnet
The menu “General configuration / SMS configuration” lets you enter the following
values needed for the ISDN unit.
ISDN MSN:
The MSN (multiple subscriber number) is assigned by the network provider.
Also the country code and the local area code must be entered (separated by “/”).
Example: +49/2772/570126
ISDN Command:
Before an SMS can be sent over the fixed network, the ISDN unit must be registered
at an SMS centre. (This is necessary only when an SMS command is to be sent to
the ISDN unit.
Receiving SMS “alarm” messages does not require registration
). )
The Deutsche Telekom SMS Centre requires an SMS containing the text “ANMELD”
to be sent to the number 8888.
Enter
“8888 ANMELD”
in the field “ISDN Command”. The ISDN unit then sends this
message to the SMS centre.
The command “8888 ABMELD” cancels the registration.
SMS Unit Message:
When this option is enabled, unit messages are also sent as SMSs (e.g. timeout,
configuration change, etc.). This SMS is sent to all target numbers.
SMS Phone Number:
Here you can enter the target call numbers that are to receive SMS messages sent
by the ISDN unit.
Prefixing the target call number by “F” (the letter F followed by a space) causes the
SMS to be sent over the fixed network.
Example: F 027725052578
When the target call number is entered
without
the prefix
“F”
the SMS will be sent
to an SMS centre in accordance with the respective mobile network protocol.
Example: 027725052578
The costs differ depending on whether an SMS is sent over the fixed network
or via mobile network operators.
