4 Assembly
Wire Cart
5
EN
2
Assembly
Note:
The assembly/installation may only be carried out by appropri-
ately trained specialist personnel.
2.1
Overview
Fig. 1: Wire Cart constr accessory options
Legend:
1. Tool holder S
2. Tool holder XL
3. Swivel castor with brake
4. Fixed castor
5. Cable shunting ring
6. Wire Cart storage shelf (order number 4051.055)
7. Flange holder
Note:
Tools or accessories shown are not part of the scope of delivery.
2.2
Assembly procedure
Note:
Assembly and disassembly require basic mechanical knowledge.
◼
Check the entire shipment for completeness using the enclosed delivery
note!
When installing the product, please proceed as follows:
Remove packaging:
1. Unscrew the screws at the four corners to detach the Wire Cart f rom the
transport pallet.
