RBS-477DMR
DMR/A
NALOG
B
ASE
R
ADIO
U
SER
M
ANUAL
R
ADIO
O
PERATION
-
G
ENERAL
Have questions?
Call 800-872-1872
or visit our website at
www.ritron.com
5
ON-OFF
V
OLUME
A
DJUST
To turn on the radio
– press and release the
ON / VOLUME UP
button.
•
“Radio On Starting” will appear on the display.
•
The radio will sound the Channel Beep.
•
The radio will turn on to the channel that was selected when it was last turned off, or can be programmed to
“Turn on to Channel 1”.
•
If the radio is programmed for “Always On” operation it will turn on automatically any time power is applied.
To increase the volume
– press and release the
ON / VOLUME UP
button until you reach the desired level.
•
The display will show the volume level on a 0-10 scale when the volume button is pressed and you will hear
any received broadcasts on the channel.
To decrease the volume
– press and release the
VOLUME DOWN / OFF
button until you reach the desired
level.
•
The display will show the volume level on a 10-0 scale when the volume button is pressed and you will hear
any received broadcasts on the channel.
To turn off the radio
- press and release the
VOLUME DOWN / OFF
button until level “0” is reached. Press
and release an additional time, a “turn-off” beep is heard and the radio turns off.
•
The radio volume will step down to level 0 before turning off.
•
“Radio Off” will appear on the display and the radio will turn off.
•
For instant turn-off, press the
PUSH-TO-TALK
(
PTT)
button while holding the
VOLUME DOWN / OFF
button.
•
If the radio is programmed for “Always On” operation it cannot be turned off.
C
HANNEL
S
ELECTION
To change channels
- press and release the
CHANNEL SELECTOR
button.
•
The radio will increment the channel, and the display will show the programmed “Channel Name”. By
default, the Channel Name will be “CHAN” followed by the channel number. The Channel Name can be
changed to any 8-character name using the PC Programmer.
•
A single character on the lower right corner of the display will indicate channel type (D=DMR, A=Analog,
M=Mixed Mode).
•
Channels programmed with channel type OFF cannot be selected with the
CHANNEL SELECTOR
.
•
If the last channel is selected and you press the
CHANNEL SELECTOR
button, the radio resets to channel
1 and the Channel Beep is heard on the speaker.
To scan all channels
- Press and release the
P2 BUTTON
until “Scan” appears on the display, then hold the
P2 Button until “Scanning” appears on the display. See the
P2 Button
section of this manual for details.
R a d i o O
n
S t a r t i n g
V o l
↑
1
V o l
↓
1 0
R a d i o
O f f
C H A N 1
D
