page
6
TRANSMIT/BUSY INDICATOR
The transmit/busy indicator is a dual color LED. When the operating channel
is busy, the TX/Busy LED will flash GREEN. At any time when the radio is
transmitting, the TX/Busy LED will light RED continuously.
FRONT FIRING SPEAKER
An internal 5 watt speaker is mounted behind the front panel for clear, crisp
audio. An external speaker (RSP-5) may be plugged into the rear panel jack,
which disconnects audio to the front speaker.
MICROPHONE PTT
Pressing the microphone PTT button on the side of the microphone activates
the radios transmitter. While pressing the PTT button, talk directly into the
front of the microphone.
MICROPHONE JACK
The microphone is connected to the front of the radio via a modular plug. The
cord may be removed by pressing up on the underside of the rubber cover
to unseat the plugs lock-tab. The rubber cover is attached to the cord and
should not be removed.
MICROPHONE HANG-UP
The microphone hang-up controls squelch and monitor functions through
a hook-switch circuit inside the microphone. The microphone is off-hook
(monitor/carrier squelch) when it is out of the hang-up clip. The microphone
is on-hook (tone squelch, if programmed with QC/DQC tone) when it is in
the hang-up clip.
RADIO CONTROLS - GENERAL
(CONTINUED)
Microphone PTT
www.TwoWayRadioEquipment.com | (800) 878-7829 | [email protected]
