2
2
2
2
2
2
2
TABLE OF CONTENTS
DESCRIPTION
PAGE
INTRODUCTION
General ................................................................................... 3
Model and Frequency Identification ....................................... 3
OPERATING CONTROLS
................................................... 3
RADIO CARE
General ................................................................................... 5
Battery ..................................................................................... 5
Battery Maintenance ............................................................... 5
TROUBLESHOOTING
........................................................... 8
QUIET CALL PRIVACY MODULE
General ................................................................................. 10
Installation ............................................................................ 10
ACCESSORIES
Optional Items ........................................................................ 9
Replacement Items ................................................................ 9
Belt Clip Installation ............................................................. 11
HOW TO OBTAIN AN FCC RADIO LICENSE
........... 11
RITRON, INC. LIMITED WARRANTY
........................... 12
DIAGRAMS
FIG-1: JBX Portable Operating Controls ............................... 4
FIG-2: JBX Radio Assembly .................................................. 6
FIG-3: RTS-5PA Quiet Call Module Installation .................. 10
ACCESSORIES
BELT CLIP INSTALLATION
The JBX portable belt clip is unique because
it is designed to bend away rather than
damage the radio case or break. The clip
may be removed and then bent back into its
original shape.
If you are going to attach the belt clip (model
CBX-A) to your JBX portable, follow the
instructions below.
1) See FIG-2 (page 4). The belt clip is
fastened to the radio case back with the
screws and washers (two of each)
provided.
CAUTION: Use only the screws included,
since longer screws might damage the
radio's electronics.
2) To reveal the screw holes, carefully
remove the peel-off tab from the belt
clip attachment points shown in FIG-2.
3) Place the belt clip on the radio case
back, aligning the two screw holes in
the clip with the holes in the radio case.
4) Use the included screws and washers
to attach the clip to the radio.
NOTES: If you remove the belt clip, re-
assemble the screws and
washers to the case to seal out
dirt and moisture.
DO NOT use petroleum solvents
of any kind on the JBX handheld.
These can corrode the radio
case.
page 11
HOW TO OBTAIN AN FCC RADIO LICENSE
Federal Communications Commission
(FCC) Licensing Information
Because your Ritron radio operates on Private Land
Mobile frequencies, it is subject to the Rules and
Regulations of the FCC, which requires all operators
of these frequencies to obtain a station license before
operating their equipment. Make application for your
FCC license on FCC Forms 600 and 159.
To have forms and instructions faxed to you by
the FCC, call the
FCC Fax-On-Demand
system at
202-418-0177
from your fax machine;
request Document 000600 & Form 159.
To have Document 000600 & Form 159 mailed to you,
call the
FCC Forms Hotline
at
800-418-FORM
(800-418-3676).
For
help with questions
concerning the
license application, contact the FCC at
888-CALL-FCC
(
888-225-5322).
You must know which radio frequency(ies) you
can operate on before filling out your application.
For
help determining your frequencies
, call Ritron at
800-USA-1-USA
(800-872-1872).
All manuals and user guides at all-guides.com
