7
Factory Zero
Your Riton riflescope is pre-set from the factory with the reticle in
the center of the adjustment ranges.
TO FIND FACTORY ZERO:
1. Dial turret one direction until it will no longer rotate.
NOTE - Do not force the turret past it’s stopping point.
2. Dial turret opposite direction counting how many MOA it
turns.
3. Divide that total number of MOA in half and dial to that
number for your factory zero.
4. Complete this procedure for both windage and elevation
dials to approximately center the reticle.
Illumination knob with numbers and battery location
Illumination System
The variable intensity reticle illumination system aids in low light
situations.
TO ACTIVATE THE ILLUMINATION:
1. Rotate the adjustment knob in either direction.
Note - The illumination knob allows for 11 levels of brightness intensity.
TO CHANGE BATTERY:
1. Unscrew the outer cap.
2. Remove the battery.
3. Replace with a new CR2032 battery with positive side out.
4. Re-install the battery cap and be sure to tighten fully.
Summary of Contents for 1TRRD
Page 1: ...RRD X1 TACTIX...
