Ritmo ELEKTRA 400, Operator'S Manual

Page: 10 / 33

9
¾
WARNING! AVOID ACCIDENTAL STARTING OF POWER TOOLS OR FUSION
MACHINE. Fusion machine has to be disconnected from generator before
turning this one on in order to avoid current peaks which can seriously damage
electronic components of the machine. Keep machine disconnected from
power supply when connecting adapters. Make sure switch is not in the ON
Position when connecting power tools to power supply or generator (especially
if tool is not equipped with safety switch). Do not carry power tools around
while they are connected to power supply since they may start accidentally.
¾
BEFORE STARTING FUSION PROCESS MAKE SURE FUSION MACHINE IS NOT
DAMAGED. Before using fusion machine make sure safety devices are perfectly
working. Make sure power cable or fusion cable are not damaged or cut;
check that connectors and adapters fit correctly and surfaces in contact are
clean. Make sure machine’s frame is not severely damaged (water infiltrations
may occur ).
¾
MAINTENANCE AND SERVICE MUST BE BERFORMED BY AUTHORIZED SERVICE
CENTRES ONLY. This machine is manufactured according to safety standards in
force therefore maintenance and service can be performed by authorized
service centres only otherwise manufacturer declines all responsibilities and
warranty is void.
¾
DO NOT PERFORM ANY MODIFICATION TO THE MACHINE.
¾
OPERATORS HAVE TO BE CAREFULLY TRAINED ON THE USE OF THE MACHINE.
¾
USE NEW EQUIPMENT OR EQUIPMENT SERVICED BY AUTHORIZED SERVICE CENTRES
AT ALL TIMES.
¾
PRESCRIPTIONS DESCRIBED BY D. Lgs. 09/04/08 n° 81 REGARDING SAFETY IN THE
WORKPLACE MUST BE FOLLOWED.
¾
DO NOT USE MACHINE IN EXPLOSIVE ENVIRONMENTS ( when in presence of
inflammable gases or steams, etc.).