Ritmix RH-701 User Manual Download Page 8

 

14

NOTE: 

You  should  then  be  able  to  move  around  freely  from  one  room  to  another  without  any 

interference. If interference does occur (interruptions in the signal), press the "Auto Scan" 

button once to find a better reception channel. 

 

For  better  stereo  reception,  stay  approximately  seven  meters  away  from  the 

transmitter when you press the "Auto Scan" button. 

If  it  is  impossible  to  find  a  satisfactory  frequency,  change  the  setting  on  your 

transmitter,  then  press  the  "Auto  Scan"  button  on  the  headphones  to  find  the 

corresponding channel. 

 

To both protect the transmitter and save power, the transmitter automatically switches off 

after  approximately  one minute  if  the  signal  that  it  receives  from  the  audio  source  is  too 

weak  for proper  reception.  If however  the signal  returns  to an  acceptable  level,  then  the 

transmitter automatically switches back on. 

 

CHARGING THE BATTERIES 

1. 

Place the On/Off switch on the receiver headphones in the Off position. 

2. 

To  recharge  the  headphone  batteries,  place  the  headphones  on  the  transmitter, 

taking care to ensure that the charge contacts touch the transmitter's charge prongs. 

3. 

The charge process starts automatically and the green indicator light comes on. Be 

sure to charge new batteries for 24 hours before using them for the first time in the 

headphones. 

 

15

WARNING: 

Never attempt to recharge conventional dry cells. 

Never  use  another  type  of  battery  or  non-rechargeable  batteries  to  replace  the 

rechargeable (LR03/AAA) batteries supplied. When the headphones are not in use, move 

the switch to the OFF position to avoid damaging the batteries. 

The batteries must always be fully charged before use. An initial 24 hour charge is required 

to guarantee an acceptable service life for the rechargeable batteries. Always ensure that 

the headphones are switched to the Off position while the batteries are charging. 

 

IMPORTANT: 

This unit should be operated with rechargeable batteries only. When replacing the batteries 

or when disposing of the unit, always comply with applicable laws relating to the disposal of 

batteries.  Please  place  them  in  a  proper  disposal  container  to  ensure  that  they  are 

eliminated safely and in an environmentally-friendly way. Thank you. 

 

 

 

 

Summary of Contents for RH-701











Reviews: