www.ritm.ru/en
2
Voyager 3N. Quick start guide.
Prepare your device
Prepare your device for connection according to the Data sheet.
• Open your Voyager 3N.
• Put the SIM card to holder (under the battery).
Make
sure, that your SIM card does not require a password.
• Put the battery inside (it maybe necessary
to charge the battery via micro USB).
!
Attention!
For correct device operation, be sure
to install the battery in it. Otherwise, the device
will not connect to the monitoring server.
• Close the lid.
3
1
4
SATELLITE
ALARM
1
2
5
6
2
7
1
MicroUSB
Connection of USB2 cable or charger.
2
NanoSIM
SIM card insertion.
3
BL-5C battery BL-5C battery installation location.
4
Buttons
and LEDs
1
,
2
and
ALARM
— transmission of alarm signals to the monitoring
software or to the user in the SMS message/using voice call
— finishing of the voice call.
— unscheduled connection to the server.
5
Side switch
Action setting in configuration software. To activate – lift it up.
6
GSP-antenna
Internal GPS-antenna location.
7
Microphone
Built-in microphone location.
