6
t
Red
Green
t
2 s
1 s
The battery is tested each time the device cover is closed!
8.5.
If the red indicator emits short flashes twice in 5 seconds (not to be confused
with the battery test mode), this means the battery is depleted and needs to be
replaced.
8.6.
Switch the device to the mode of addition to a radio system (see Paragraph 6).
Add the device to the control panel radio system according to the radio system
instruction. The distance between the device and the receiver should be at least
1 m. The device then receives settings from the control panel. The addition
process is illustrated in the diagram:
t
Device
successfully added to
radio system
Adding to radio
system is in
progress
Red
The active device
has been found
Green
The device
switched to
adding mode
8.7.
Switch the device to the radio channel test mode (see Paragraph 6).
8.8.
Make sure the message exchange quality is strong in the supposed installation
location by referring to LED indicators. 2–3 missed responses are OK for 10
transmitted messages:
