RITEWAY HH-8200NT, Operator'S Manual

Page: 14 / 84

7
1. Read manual thoroughly before operating machine.
2. Study all warning decals on implement.
3. Most accidents occur because of neglect or carelessness.
4. Do not allow riders on the tractor or implement during operation.
5. Do not allow children on or near the machine.
6. Connect the implement hitch to the tractor before operating the hydraulic system.
NOTE: Be aware of any hydraulic leaks.
7. Always throttle the tractor down and use caution when connecting the implement to the tractor
hitch.
NOTE: Never stand between the tractor and implement.
8. Lower the hitch jack onto firm ground and chock the tires when un - hooking implement from tractor.
NOTE: Ensure the unit is on level ground prior to un - hooking tractor.
9. Exercise extra caution when working on hillsides or near ditches.
10. Ensure that the tractor draw - bar is pinned during transport.
11. Maximum speed while transporting the HH - 8200NT is 25 mph (40 km/h).
12. Ensure that the HH - 8200NT frame is lowered to the ground before doing any work on machine.
NOTE: If it is necessary to work on machine with the drawbar raised, ensure that cylinders
are locked in position using the lock pin.
13. Do not work on this machine when hydraulic system is under pressure.
14. Observe all laws and regulations when transporting unit on public roads.
15. Do not transport this machine on public roads unless all safety & maintenance checks have been
completed.
16. Ensure the tires are inflated to the correct pressure:
11L - 15 (Wings): 90 psi
12.5L - 15 (Wings): 90 psi
16.5 x 16.1 (Center Frame): 35 psi
This machine will provide years of trouble - free & safe operation IF
all maintenance and safety instructions are followed.