RITE-HITE STR-4200 Dok-Lok Owner'S Manual Download Page 7

Page: 7 / 44

Rite-Hite

Owner's Manual

STR-4200™ Dok-Lok

Publication:

AMEN00102 2017-07-06

OPERATION

WARNING

Before loading or unloading a vehicle at your

loading dock while using a Dok-Lok vehicle

restraint, always visually confirm barrier blocks

R.I.G. assembly. Secure trailer by other means, if a

condition occurs that cannot be fixed by backing

trailer firmly against dock bumpers.

Area around R.I.G. assembly must be free of

plates or other obstructions.

Always operate Dok-Lok vehicle restraint from top

of dock.

Dok-Lok vehicle restraints should be operated by

authorized personnel who have read and

understand Owner’s Manual.

Contact your local Rite-Hite representative or

Rite-Hite (U.S.) 800-456-0600 with any questions.

Failure to follow these procedures could allow

unexpected trailer / loading dock separation,

resulting in death or serious injury.

WARNING

Power moving components. Serious injury could

occur.

Slip hazard: Do not use equipment

as a step.

Pinch hazard: Keep all extremities

away.

Summary of Contents for STR-4200 Dok-Lok













































Search results

Summary of Contents for STR-4200 Dok-Lok

Reviews:

Related manuals for STR-4200 Dok-Lok

Brands by name

Popular brands

RITE-HITE STR-4200 Dok-Lok, Owner'S Manual

Search results

Summary of Contents for STR-4200 Dok-Lok

Reviews:

Related manuals for STR-4200 Dok-Lok

Brands by name

Popular brands