RITE-HITE FLASHFOLD 1390, Manual

Page: 7 / 20

PUB. NO. 1390E APRIL 2014 7
FLASHFOLD ™ MODEL 1390
CURTAIN/GUIDE INSTALLATION
Wrap Curtain Around the
Header and use the Hook
and Loop Fastener to
Assemble
If optional curtain guides are
equipped, they are fastened with 1/4-
20 x 3/4” [6x19] bolts and “T” nuts to
all holes on curtain guide to all (4)
pieces. They are installed by lifting to
the top of the sideframe and slid into
the groove. Leave a 1/8” [3] gap
between the end of the curtain guide
and the top of the curtain container
to allow for the front and rear cover
installation. If overhead clearance is
not available, the unit may need to
be tipped down to gain access.
7.1
7.2
7.3
Driv
e and Cur
tain Installa
tion
Place the bottom of the curtain into
the bottom of the curtain container
and tek screw the ABS strip, and the
steel strip at the bottom braces on
the frame of the curtain container.
Install the container covers removed
earlier.
Fasten with the #12-14 x 3/4” [19]
self tap/drill screws provided at the
top and bottom of the covers.