INSTALLATION
Change Orientation
Storage Post
THE MOUNTING HOLES FURTHEST FROM OPENING ARE USED TO ATTACH THE
LATCH PLATE
REVERSAL OF OPERATION IS LIMITED TO STAND ALONE DGLD UNITS ONLY &
NOT APPLICABLE TO COMMON MEMBER UNITS WITHOUT ACQUISITION OF NEW
INTERMEDIATE POST(S).
B
A
C
C
1
2
G
Receiver Post
THE MOUNTING HOLES FURTHEST FROM OPENING ARE USED TO ATTACH THE
LATCH PLATE
REVERSAL OF OPERATION IS LIMITED TO STAND ALONE DGLD UNITS ONLY &
NOT APPLICABLE TO COMMON MEMBER UNITS WITHOUT ACQUISITION OF NEW
INTERMEDIATE POST(S).
F
D
THE MOUNTING HOLES FURTHEST FROM OPENING ARE USED TO ATTACH THE
LATCH PLATE
REVERSAL OF OPERATION IS LIMITED TO STAND ALONE DGLD UNITS ONLY &
NOT APPLICABLE TO COMMON MEMBER UNITS WITHOUT ACQUISITION OF NEW
INTERMEDIATE POST(S).
E
D
1
2
G
NOTICE
Reversal of operation is limited to stand alone
Dok-Guardian LD units only and not applicable to
common member units Please contact your local
Rite-Hite representative or Rite-Hite technical support
for additional information
To modify the Dok-Guardian posts to pull the curtain in the
opposite direction:
1 Separate the roller support (B) from the storage
post (A) by removing the 3 bolts, washers, and
nuts (C)
2 Turn the roller support completely upside down (1)
and set next to the opposite post (2)
3 Separate the latch bracket (E) from the receiver
post (F) by removing the 3 bolts, washers, and
nuts (D)
4 Turn the latch bracket completely upside down (1)
5 Position the latch bracket on the opposite post (2)
Use the mounting holes furthest from the center
opening (G) and refasten
6 Position the roller support on the opposite post (F)
and refasten using 3 bolts, washers and nuts
Figure 1
Dok‑Guardian™ LD Safety Barrier
Installation/Service/Owner's Manual
Rite‑Hite
®
4 Publication:
AMEN00150 2019-11-13
