Riso SE 9380, User Manual

Page: 45 / 268

Basic Operations
Printing from a Paper Document or Book
43
Printing from a Paper Document or Book
The steps for scanning an original for printing is explained below.
1
Make sure the machine is ON.
Check the Control Panel.
Note:
• When the power is OFF, both the Display and
the key are off. Turn the power ON.
• If the key is lit, the machine is in Energy
Saving mode. Press the key to cancel
Energy Saving mode.
2
Check for printing paper.
Make sure the paper is loaded.
To load or to change the paper, see the following page:
) p.37
After replacing with paper of a different size,
adjust the position of the Receiving Tray Paper
Guides and Paper Stopper.
) p.36
3
Check the Display.
‹
When the Recognition Screen is
displayed.
Follow the message on the screen.
For details, see
) p.114.
The initial screen will be displayed after the
user has been identified.
‹
When the initial screen is displayed
Proceed to step 4.
The initial screen differs depending on the set-
ting of “Display Priority” of “Admin.”.
4
Touch [MasterMake] on the Opera-
tion Selection Screen.
The Master Making Basic Screen appears.
Note:
• When you see [Data-Map] in the Status Area,
the machine is busy receiving electronic data
from the computer. Please wait a moment.
5
Place the original.
Place the original on the Glass Platen or in the
optional ADF (Auto Document Feeder) unit.
To place the original, see
) p.41.
RISO SE9380A RISO SE9380A
S e l e c t a n O p e r a t i o n M o d e
MasterMake
P r i n t i n g
A4
L i n e
Black
Page (A4)
Basic Selections Functions Admin.
Contrast
Auto
Size Paper
I d l e
Multi-Up
Print
D-Feed
Check
I n f o
Ready to Make Master