manualshive.com logo in svg

Riso MH 9350, User Manual

Share
Download
Riso MH 9350 User Manual Download Page 206

Chapter 12 Appendix

204

Optional Accessories

■

Auto Document Feeder AF-VII

Feeds up to approximately 50 pages of originals auto-
matically.

■

Color Print Drum (Cylinder)

Enables the print colors to be changed easily simply 
by replacing a print drum (cylinder). (Dedicated case 
included)

■

Wide Stacking Tray

A paper receiving tray that is applicable to paper sizes 

of up to 340 mm × 555 mm (13 3/8 inches × 21 27/32 
inches).

■

IC Card Reader Activation kit RG

Enables individual user management and enhanced 
security with the use of IC cards.
To use IC cards, [Recognized by] (

A

 150) must be 

configured in [Admin.].

■

Job Separator IV;NIII

Enables easy separation of printed papers simply by 
inserting tape strips when using [Job Separation] func-
tion (

A

 115).

■

Card Feed Kit

A unit for feeding paper of the following range of 

weights.
100g/m

2

 to 400g/m

2

 (27-lb bond to 221-lb index)

■

Envelope Feed Kit

A unit for feeding envelopes.

■

RISO Controller IS300

A dedicated controller that enables this machine to be 

used as a network-connected PostScript 3 printer.

■

RISO Printer Driver for Macintosh

A printer driver that enables the use of this machine 

on Mac OS.

■

RISO PANEL-D

A free app that can be used on commercially available 

tablets (Android OS). You can easily print paper origi-
nals by connecting the tablet to this machine.

A variety of optional accessories are available to 

enhance the capabilities of this machine.
To purchase the optional accessories, consult your 
dealer or authorized service representative.

Summary of Contents for MH 9350



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands