Riso MH 9350, User Manual

Page: 155 / 218

Chapter 7 Setting the Operation Conditions
153
7
■
[Disable]
You can prohibit the use of this machine by
specific users.
(
A
153 “Temporarily disabling the usage of this
machine”)
5
Touch [OK].
Remove the USB flash drive for authentication,
if it is inserted.
When registration is complete, provide the fol-
lowing items to the user.
■
When [Recognized by] is set to [PIN
Code]
• Authentication registration number
• PIN code
■ When [Recognized by] is set to
[USB Flash Drive] or [IC Card]
• Authentication registration number
• USB flash drive for authentication or IC card
■
Changing the user name
1
Touch [Rename].
2
Enter the user name.
(
A
27 “[Rename] screen”)
3
Touch [OK].
The [Register] screen is displayed.
■
Setting the group
1
Touch [Group].
2
Touch the group that you want to
set.
3
Touch [OK].
The [Register] screen is displayed.
■
Setting the upper limit number of copies
that can be used
1
Touch [Limit].
2
Enter the upper limit number of
copies for printing and master
making.
Touch the entry field of [Limit T/C] or [Limit M/
C], and then enter the upper limit number of
copies using the numeric keys.
When the upper limit number of copies is set to
0, no limit is applied.
3
Touch [OK].
The [Register] screen is displayed.
■
Temporarily disabling the usage of this
machine
1
Touch [Disable].
[Disable] turns on.
B
The authentication registration num-
ber is required for using [ID print].
B
If no group is to be set, touch [OFF].
B
In [Present T/C] and [Present M/C],
the number of copies that the user
has printed or the number of mas-
ters that the user has created up to
the present are displayed, respec-
tively.
B
To clear the counter for [Present T/
C] and [Present M/C], touch [
T
].
B
To cancel the temporarily disabled
state, touch [Disable] again.
B
Administrator usage of this machine
cannot be temporarily disabled.