Riso MH 9350, User Manual

Page: 154 / 218

Chapter 7 Setting the Operation Conditions
152
1
Touch [Create User] in the [User
Management] screen.
2
Touch the authentication registra-
tion number to be assigned to the
user.
The [Register] screen is displayed.
3
Register the information for
authentication.
■
When using PIN code
Enter the PIN code using the numeric keys.
The entered number is displayed.
■
When using USB flash drive
Insert a USB flash drive that is to be registered
for authentication.
The number specific to the USB flash drive is
displayed (you cannot change this number).
■
When using IC card
Hold the IC card to be registered for authentica-
tion over the reader.
The number specific to the IC card is displayed
(you cannot change this number).
4
Set the user information.
Set the following items as necessary.
■
[Rename]
You can change the user name. The name that
is set here will be displayed in “USERNAME” in
the CSV file that is saved in [ID Counter
Report] (
A
122).
(
A
153 “Changing the user name”)
■
[Group]
You can set the group (department, etc.) to
which the user belongs. Once this item is set,
the total count for each group is displayed in
the CSV file that is saved in [ID Counter
Report] (
A
122).
(
A
153 “Setting the group”)
■ [Limit]
You can set the upper limit of the number of
copies that the user can use for master making
or printing.
(
A
153 “Setting the upper limit number of cop-
ies that can be used”)
B
If no administrator is registered,
you cannot register general
users. Register the administrator
first.
B
You cannot select numbers for
which users have already been reg-
istered.