Riso MH 9350, User Manual

Page: 148 / 218

Chapter 7 Setting the Operation Conditions
146
Registering the Custom Size
Paper [Custom Paper Entry]
■
Paper size that can be registered
90 mm × 148 mm (3 1/2 inches × 5 13/16 inches) to
340 mm × 555 mm (13 3/8 inches × 21 27/32 inches)
• The paper sizes that can be used depend on the
print mode. (
A
15 “Paper size”)
• You can use papers up to a size of 320 mm ×
432 mm (12 19/32 inches × 17 inches) on the stan-
dard paper receiving tray. When the optional Wide
Stacking Tray is installed (
A
204), you can use
papers up to a size of 340 mm × 555 mm
(13 3/8 inches × 21 27/32 inches).
Papers may not be arranged properly depending on
the paper type or paper size.
• For papers that are 436 mm (17 5/32 inches) or lon-
ger, this machine prints in extended paper mode
(
A
72).
• For paper width that are less than 100 mm (3 15/16
inches), papers may not be arranged properly
depending on the paper type or paper size.
Registering the paper size
1
Touch [Custom Paper Entry] in the
[Admin.] screen.
2
Touch a button for which nothing
has been registered.
3
Specify the paper size.
You can specify the paper size using either of
the following methods.
• Entering a numeric value using the numeric
keys.
• Touching [
G
] or [
F
].
4
Touch [OK].
The [Custom Paper Entry] screen is displayed.
When using paper other than the standard size
paper (
A
16), you need to register the paper size in
advance.
You can select the registered paper sizes in [Paper
Size] (
A
72).
B
When you set [H] to any value from
436 to 555 mm (17 5/32 to 21 27/32
inches), the paper is called
“extended paper”.
(
A
72 “Using Custom Size Paper
[Paper Size]”)
B
To use extended paper, the optional
Wide Stacking Tray is required.