Riso MH 9350 User Manual Download | Manualshive

Page: 144 / 218

background image

Chapter 7 Setting the Operation Conditions

142

[Protect]

This item is set for controlling the used masters.

155 “Protect”

[Auto Idling]

You can set [Idling Action] (

118) to be performed automatically

during the next master making if the print drum (cylinder) has not
been used for a certain amount of time.
[Idling Action] is an operation that ensures the ink usability and
stability.
To increase the ink usability and stability, set a higher value in
[Rotation].

OFF, ON
[Non-Use Time]: 1 to 12 hour
[Rotation]: 1 to 3

[Auto Page Renewal]

You can set [Renew Page] (

100) to be performed automatically

when the number of printed copies has reached the specified
number. You can also specify the number of proof copies after
master making is performed again.

OFF, ON
[Auto Renewal Point]: 1 to 1000 to 9999
[Sample Copy Output]: 0 to 3 to 99

[Minimum Print Q'ty]

You can set master making to be performed only when the entered
number of printed copies is more than the specified number.

OFF, ON
2 to 99

B

You can lock the setting of [Minimum Print Q'ty], so that it
cannot be changed. For more information, consult your
dealer or authorized service representative.

[Service Info. Mail]

This item is set for sending e-mails by [Service Info. Mail] (

126 “Sending E-Mails of the Operation His-

tory [Service Info. Mail]”

B

This setting item may not be displayed depending on
your system configuration. For more information, consult
your dealer or authorized service representative.

[Copy Count Mail]

This item is set for sending e-mails by [ID Counter Report]
(

124 “Sending E-Mails of [ID Counter

B

This setting item may not be displayed depending on
your system configuration. For more information, consult
your dealer or authorized service representative.

[Initialize Network]

You can restore the settings of [Network Settings (IPv4)], [Network
Settings (IPv6)], and [Network] for the RISO Console (

the factory default settings.

Touching [Initialize Network] displays an exe-
cution confirmation screen.
Touch [OK] to execute initialization.

[Beep Sound]

• When this item is set to [OFF], no buzzer will occur.
• When this item is set to [Limited], an error sound will occur in

case of an error.

• When this item is set to [ON], not only an error sound, but also

operation sounds for items such as keys and buttons, and confir-
mation sounds for the completion of an operation will occur.

OFF, Limited, ON

Setting item

Description

«
...
142
143
144
145
146
...
»

Summary of Contents for MH 9350



























































































































































































































Reviews:

No comments

Related manuals for MH 9350

Brand: Teac Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands