Advanced Features
Reproducing the Master [Renew Page] [Auto Page Renewal]
173
Reproducing the Master
[Renew Page]
[Auto Page Renewal]
The data from the last master-making process is temporarily stored on the machine.
Using this data, another master can be reproduced without repeating steps to scan the same original.
“Auto Page Renewal” is a function that automatically recreates a master when a specified number of pages are
printed. If you are printing a high-volume job of thousands or tens of thousands of copies, the master may degrade
before the job is completed.
If you set “Auto Page Renewal” to “ON” prior to starting a large-volume print job, a master will be automatically rec-
reated when the specified number of copies is reached (Auto Renewal Point). This allows you to maintain a consist-
ent print quality from start to finish.
Note:
• When Dual-Color printing, you can select the Print Drum (Cylinder) on which to recreate the master. When Mono-
Color printing, the current Print Drum (Cylinder) is used to recreate the master.
• When Dual-Color printing, you can switch the original data of Print Drums (Cylinders) 1 and 2 and
[Renew Page]
by touching
[Sw.Color]
on the screen. (Excluding cases when Print Drum (Cylinder) 1 is A4/Letter-R Drum (Cyl-
inder).)
• “Renew Page” works with data sent from a computer as well. However, if multiple pages exist, only the last page
will be processed with “Renew Page”.
• You can “Rotate” the original and recreate a master. (Excluding cases when Print Drum (Cylinder) 1 is A4/Letter-
R Drum (Cylinder) during Dual-Color printing.)
• The “Renew Page” function is not available in the following conditions:
– when not making a master even once after turning on the power switch
– after pressing the
key
– after executing “Auto Clear” (“Changing Default settings”
– after performing “Confidential”
– after master-making for Data Output Mode (when the optional Key Card Counter is installed.)
– when an error has occurred during master-making
• The number of pages in the proof copy when using “Auto Page Renewal” can be adjusted using “Admin.”.
• When the print position has been adjusted, 2 proof copies will be made. (When the print position has not been
adjusted and when the print position has been adjusted)