Rise R-656 User Manual Download Page 30

Page: 30 / 38

【

】

__________________________________

Soft-Off by

Instant Off: Turn the power off immediately after booted OS.

PWR_BTTN

Delay 4 sec. : Turn the power off Delay 4 second.

Note: Reference 2.1.2 ATX Power ON/OFF Switch

The Choice: Enabled, Disabled

Resume by Ring

Select Enabled to Activate Remote Power On when

Modem

Ring.

The Choice: Enabled.

Resume By Alarm

Select Enabled to Activate Alarm Power On .

Date (of month)

: every day

Alarm

1~ 31

: day of month

Time (hh:mm:ss)

Auto power on time

Alarm

Date and Time Alarm do not appear if Resume by Alarm

field

disabled.

Break Event From Suspend

IRQ 8 Clock Event

You can turn On or Off monitoring of IRQ 8 (the Real Time

Clock) so it does not awaken the system from Suspend

mode.

The Choice: Enabled, Disabled.

Reload Global

When Enabled, an event occurring on each device listed

Timer Events

below restarts the global time for Standby mode.

IRQ[3-7, 9-15], NMI

Primary

IDE

Primary

IDE

Secondary

IDE

Secondary

IDE

Floppy

Disk

Serial

Port

Parallel

Port

_______________________________________________________________

3-14

Summary of Contents for R-656







































Search results

Summary of Contents for R-656

Reviews:

Related manuals for R-656

Brands by name

Popular brands

Rise R-656, User Manual

Search results

Summary of Contents for R-656

Reviews:

Related manuals for R-656

Brands by name

Popular brands