Chapter 7. Setting Guide for each Configuration
7.3.2
Network Settings (Server)
After clicking Network Settings among the Set Menus, set values as shown in
Figure 7-13. Ad-Hoc Mode Network
and then
click the [Submit] button.
Figure 7-13. Ad-Hoc Mode Network Settings (Server)
1. Set Device Type to
Device Server.
2. Set Connection Mode to
Static IP.
y
The mode is set to Static IP because a Client WiComm-1 should know the IP address of the Server WiComm-1
to use Ad-Hoc mode.
3. Set IP Address, Subnet Mask, Gateway, and DNS as factory default values.
y
For the setting, the user should know the range of IP address assigned in advance.
4. The IP address and the Subnet Mask of Ethernet Configuration are used for the setting of the wired LAN of the
WiComm-1.
y
These items are set only if required.
7-13
