12/2019
Page 4
5IN2812 C
Setup by Serial Number
1.
From the Wired Keypad, navigate to the Programing (installer) menu, select
7)Install
> 2)WL Device > 2)Allocation > 2)By Code > 3) Keypad
and then press
2.
If there are two receivers allocated to the system, select the receiver you wish to
allocate and then press
3.
Select the Keypad location in the system and then press
4.
Enter the Keypad’s 11-digit Serial Number and then press
; the keypad
will display the Serial Number.
NOTE:
Adding the keypad to the system can also be done remotely
using the
configuration software by entering the serial number of the keypad or by RF
communication.
