LightSYS2 Quick User Guide
11
SMS Control Commands via GSM
To control the system via SMS commands, the system must be equipped with a GSM
module.
SMS Commands
Set:
code + S (Example: 1234S)
View last alarm :
code + AL
Part Set:
code + P (Example 1234P)
Group
Set:
code + G + select group A—D
Unset:
code + US (Example 1234US)
Get SIM credit level:
code + CR
Partition Set:
code + S + partition number
Activate
Output:
code + POON + PO number
Partition Part Set:
code + P + partition number
Partition Unset:
code + US + partition number
Deactivate
Output:
code + POOFF + PO number
Get system status:
code + ST
Omit Zone:
code + OM + zone number
Change FM number:
code + F FM serial
NEW + new phone number
Un-Omit Zone:
code + UNOM + zone number
Notes
:
1. Command words are not case sensitive (they can contain both capital, small or mixed
lettering).
2. A separator between command words is not required, although it is accepted.
3. Default grand master code is 1234.
4. To receive an acknowledgement reply, add
RP
to the end of an SMS command.