RIPSpeed DV740, Operation Instructions Manual

Page: 12 / 47

Display system time
Press and hold the [DISP] key on the front panel to switch the display
information between system time and playing source when the TFT
monitor is closed.
Open / Close monitor
Press the [OPEN/CLOSE] key on the front panel or remote control to
push the display panel out or in.
Change the monitor tilt angle
Due to the inherent character of LCD, you will get different vision
impression when you watch it from different .
The display angle of this unit can be changed; hence you can select the
best angle where you can get the best vision impression.
Change aspect ratio
Press the [WIDE] key on the display panel or remote control to adjust the
aspect ratio.
Image s
Enter image set mode
Select one item to adjust
Adjust the value
Exit image set mode
To exit image set mode, repeat the first step or stop operation for
some seconds.
Reset the unit
I
f the unit can not work correctly, you should reset the unit by pressing
the [RESET] button on the front panel.
Using the TFT Monitor
s angles
Press the [TILT] key on the display panel or the remote control to adjust
the tilt angle one step at a time.
Press and hold the [TILT] key on the display panel or the remote control
to adjust the tilt angle continuously.
etting
ting
P
P
ting
ting
(
1
)
ress the [PIC] key on the remote control.
(
2
)
Press the [ ]/[ ] keys on the remote control.
(
3
)
ress the [ ]/[ ] keys on the remote control.
( 4 )
Basic operations
06