Specifications
General
Power supply:
12V DC(11V-16V)
Test voltage 14.4V, negative ground
Maximum power output:
45Wx4 channels
Continuous power output:
24Wx4 channels (4 ,10% T.H.D.)
Suitable speaker impedance:
4-8 ohm
Pre-Amp output voltage:
2.0V (CD play mode: 1KHz, 0 dB, 10 K load )
Fuse:
15A
Dimensions(WxHxD):
178x50x162mm
Weight:
1.7kg
Sub-woofer out:
2.0V
FM Stereo Radio
Frequency range:
87.5-108.0MHz (EUROPE MODE)
87.5-107.9MHz (USA MODE)
Usable sensitivity:
8dBμ
Quieting sensitivity(S/N=50dB): 12dBμ
Frequency response:
30Hz-15kHz
Stereo separation:
30dB(1kHz)
Image response ratio:
50dB
IF response ratio:
70dB
Signal/noise ratio:
55dB
MW(AM) Radio
Frequency range:
522-1620KHz (EUROPE MODE)
530-1710KHz (USA MODE)
Usable sensitivity(S/N=20dB):
30 dBμ
Disc Player
System:
Disc digital audio system
Frequency response:
20Hz-20kHz
Signal/noise ratio:
>80 dB
Total harmonic distortion:
Less than 0.10%(1 kHz)
Wow and flutter:
Below measurable limits
Channel separation:
>55 dB
Components
Mounting collar .......................................................................................1
Machine screws M5x6mm ......................................................................4
Mounting bolt (50mm).............................................................................1
Wire connector .......................................................................................1
Removable face plate case ....................................................................1
Trim plate................................................................................................1
L-key .......................................................................................................2
Operating instructions.............................................................................1
Rubber cushion ......................................................................................1
Remote control unit(with battery)............................................................1
Note: Specifications and the design are subject to change without
notice due to improvements in technology.