Important notice:
When powering on the quadcopter the receiver gyro will need to calibrate level,
so you must make sure the surface is level. Then the quadcopter will be ready
for controlling.
Battery
Battery installation and power connection for quadcopter
Additional instruction before flying:
1. White blade is at front and black blade is at back.
White Blade
Clockwise
Black Blade
Clockwise
White Blade
counterclockwise
black blade
counterclockwise
Right
Left
Front
Back
2. Power on the quadcopter check the rotating of blades.Left Front/Right rear
blades rotating Clockwise, Right front/Left behind rotating Counterclockwise.
3. When flying, if the quadcopter tilts to one side,then you can adjust balance
by relative trim key.
4. When the quadcopter battery is low, then the transmitter will sound
DI,DO,DI... to warn. When you receive the warning, then you need to remote
back the quadcopter within 40 seconds.
Flying control:
1. When moving throttle stick to left
or right, then the quadcopter is flying
left or right at the same time.
2. When moving throttle stick up or
down, then the quadcopter is flying
up or down at the same time.
6