background image

1.  Plug the battery charger into a mains socket and the LED indicator should illuminate green.

2.  Connect the lithium battery to the red charger output connector and the charger LED 

indicator should change colour to red.

3.  The battery is now changing, this should take approximately an hour.

4.  Once the battery is charged the charger LED indicator will change back to green 

indicating the battery is fully charged.

5.  Disconnect the charger from the mains socket and store ready for next use.

•  Only plug the charger into a conforming mains socket.

•  Do not force the battery connector in backwards.

•  Do not charge the battery if it is hot or has sustained any damage.

•  Do not drop, crush, puncture or set fire to the battery.

•  Do not leave the battery in direct sunlight for an extended period.

•  Do not leave the charger unattended while charging.

•  Do not over charge the battery.

•  If the battery is hot or smells stop charging immediately and remove to a safe location. 

•  Disconnect the battery after use and store fully charged.

•  Do not store the battery near a heat source.

•  After use if the battery is warm, do not use or recharge until it has cooled down.

•  If you have any questions about safe battery use contact your dealer.

Battery Charging Instructions

< < < < < < < < < < < - - - - - - Warning - - - - - - > > > > > > > > > > >

Alignment interpolation

Indicator light

Black line

White Logo

Red Black Black

Diagram 1

Diagram 2

Diagram 3

1

2

Red

Red

Black Black

1

2

3

Reviews: